What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
11.06.2025 01:50

“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
2024–10–10[John johnson John Johnson ]
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
If there exists a “New York of Australia”, is it Sydney or Melbourne?
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
In schematic diagrams this is the symbol for a fuse:
This is where this question deviates from being a 'generic' question, and becomes more specific.
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
This is the picture of an electronic coil of wire wound around a core of magnetic material.
First Sentence:
Street Dog Who Fought to Survive by Eating Rocks and Dirt Has Us in Tears - PetHelpful
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
Oregon State leaves no doubt, outslug Florida State to reach College World Series - OregonLive.com
[image of Common-mode choke]
2024–10–16 [ OO OLAOYE OYEBODE ]
I post the exact comment here.
What did someone say to you that instantly made you realize their life was in danger?
Edit 2024–10.
The bolt then partially travels down the line to your home.
a photo is worth a thousand words.
Where the Stock Market Stands Now After a Wild Start to the Year - Bloomberg.com
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
What is lightning?
This device then solves the entire problem.
Here is a simplified AC power diagram.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
It also is a device that limits the change in current flow.
Key moments from the third week of Sean ‘Diddy’ Combs’ sex trafficking trial - AP News
An AC voltage/ current source, and an ac inductive load.
The other is “what does a “fuse” do?”
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
Israel is accused of the gravest war crimes in Gaza - BBC
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
It seems Mohan does not understand the difference between a comment and an Answer.
One is “what exactly is in a ‘surge protector’ ? ”
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
He then asserts :
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
Why do nice guys rarely or never win?
He then describes Rainy Season and Lightning.
The third is lightning and “how it gets conducted into a home.”
But… the neutral is now “floating” because of the 1 ohm resistance.
FDA chief wary of federal recommendations for Covid-19 vaccines - Politico
For this case there are devices called Metal oxide varistors (MOV).
These devices are installed between the “hot” and “neutral” and protective ground.
This is 'the assistant's answer'
This one hit behind the barn.
Upvotes:
A fuse is a non-resetable over current circuit protector.
[old diagram got deleted by accident]
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
so, what happens?
eight
At least they know the answer if they wanted it.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
The MOV will conduct when the voltage exceeds 50% of line voltage.
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
These are simplified answers to the original question, and does not change anything I wrote above.
There are two important concepts here.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
nine
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
2024–10–14 [Omar Gharbi Omar Gharbi ]
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
So, the voltage could go up to 500 volts, and the fuse will not open up.
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
(Dc diagram shown, AC is similar).
the problem then depends on "how fast does the fuse operate?".
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
Now when you have a certain ac resistance, then a current flows in a loop.
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
What does a fuse do?
This is where the MOV conducts again, and dissipated the energy.
Barnstars:
He then describes the function of a fuse.
what exactly is a ‘surge’ protector?
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
But it can get overloaded, and no longer works.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
Because the load is inductive, the current lags the voltage.(by a bit).
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
but I think this circuit , shows a few more pieces.
A circuit breaker is similar, but is resettable.
At one ohm, the resistor has a maximum of 1 watt power.
but this device (an Inductor) … impedes the rapid changes in the current.
One
There are three different concepts here that are getting confused.